Sandvik
BUSHING 150 514 08 / 15051408 — Sandvik Compatible
BUSHING is a high-strength aftermarket spare part fully compatible with Sandvik hydraulic drifters and rock drills. Precision CNC-machined to original-part tolerances. Contact us for stock and delivery on OEM number 150 514 08.
Fill in the quote form for price and stock; we'll get back to you shortly.
BUSHING — OEM 150 514 08 / 15051408
- OEM Number
- 150 514 08
- Also written as
- 15051408
- Compatible Brand
- Sandvik
- Part Type
- Drifter
What the BUSHING does
Bushings and liners are the sacrificial bearing surfaces inside a drifter. They guide the percussion piston and the shank adapter, hold them concentric under impact, and are deliberately made to wear before the expensive housings and shafts they protect. Front and guide bushings take the worst of it, sitting closest to the dust, water and side load coming back from the hole.
Signs it needs replacing
- Radial play in the shank adapter that can be felt by hand
- Repeat seal failures — a worn bushing lets the shaft move off centre and cuts the seal
- Oval or stepped wear visible on the bore
- Rising oil consumption with no external leak
Before you fit it
Measure the mating shaft or piston before fitting: a new bushing on a worn shaft simply moves the clearance problem. Bushings are pressed to an interference fit — heating the housing or chilling the bushing seats it without galling the bore.
General guidance for this class of component. Always work to the torque figures, clearances and service intervals in your machine's own manual.
About This Part
Which machines does BUSHING (OEM 150 514 08) fit?
It is used on Sandvik hydraulic rock drills and drifters. Models we already carry parts for: HL1560 ROCK DRILL (DRIFTER), HL300 ROCK DRILL (DRIFTER), HL710 ROCK DRILL (DRIFTER), HL820T ROCK DRILL (DRIFTER), RD314 ROCK DRILL (DRIFTER), RD525 ROCK DRILL (DRIFTER). If yours is not listed, send us the OEM number and we will confirm the fit.
How should I write the OEM number?
This part number is written two ways: 150 514 08 (spaced) and 15051408 (unspaced). Both refer to the same part, and the site search finds either spelling.
Is this an original Sandvik part?
No. This is an aftermarket part manufactured by KY Rock Drill and CNC-machined to original-part tolerances. We are not affiliated with or an authorised dealer for Sandvik; the OEM number is quoted only to identify compatibility.
