ACCUMULATOR 154 045 68 / 15404568 — Sandvik Compatible

What the ACCUMULATOR does

The accumulator smooths the pressure pulses the percussion mechanism generates. Each stroke sends a shock wave back into the supply line; the accumulator absorbs it and returns the energy on the next cycle. Without a functioning accumulator those pulses travel into the hoses, pump and valves instead.

Signs it needs replacing

• Hoses visibly jumping or hammering during percussion
• Reduced impact energy and slower penetration
• Short hose and fitting life throughout the hydraulic circuit
• Loss of charge pressure between shifts

Before you fit it

Check the gas charge at the interval the machine manual gives — a discharged accumulator is a common cause of premature hose and pump failure on a percussion circuit. Replace the diaphragm whenever the accumulator is opened.

General guidance for this class of component. Always work to the torque figures, clearances and service intervals in your machine's own manual.

About This Part